Alert limits for consumption types are managed in the energy process settings.
Go through the process menu Energy > Settings
Alarm limits are defined in the energy settings
Alarm limits can be set per property, building, or meter. If the settings are not configured at a lower level, the higher-level settings are used.
Alert limits are defined for each property. After the property selection, the level to which the alarm limit applies to is selected. Click the three dot icon by the level to editing or remove the level.
When modifying the alert limit, you also select the type of consumption and whether monthly or annual alert limits are used. The limits for the alerts are also defined here.
Granlund Manager creates deviations in history when the limit values are saved for the selected property. NOTE! Saving values creates deviations for all consumption categories where alerts are enabled. Therefore, previously created deviations may re-emerge. Deviations are created if the monthly or annual consumption of the meter exceeds or is below the limit values. The thresholds set at the higher level are inherited from the lower levels.